InsertCore
Ray Chan — InsertCore cutting tool application specialist

Ray Chan

Cutting tool application & sourcing — I write what I quote.

A one-person trading and selection desk for carbide inserts and CNC cutting tools. I read the datasheets, question the adjectives, and quote by complete designation strings — serving shops turning steel, milling aluminum and finishing hardened work.

CNC tooling sourcingGrade & geometry selectionISO 513 / ANSI specsFailure diagnosisTrial-box verificationShips from Guangzhou

Where I come from

My degree is in Business English, not mechanical engineering — an odd starting point for someone who ends up arguing about chipbreakers. Four years of language training got me to the point where I can talk a foreign buyer through a quotation, read a supplier datasheet in its original wording, and write proposals without a translator in the loop. That turned out to be the door into everything else: not "I code", but "I understand how overseas buyers search, read, and decide to place a trial order."

The tools side came later and the hard way — from real conversations with workshops. The first time a machinist explained to me why his inserts were chipping on an interrupted cut, I realized the catalog copy I had been quoting from was mostly adjectives. So I started reading the standards instead: ISO 513 groups, ANSI designation rules, ASTM conversion tables, supplier published windows. That reading habit is what these articles are made of.

What I do now

InsertCore is my one-person trading and selection desk. Machine shops, buyers and distributors send me a drawing, a material, or just a failed job — and the reply reasons it out: which ISO group the work truly belongs to, which grade inside it, which breaker suits the feed, and what the published speed window says. Nothing here is a brand-name substitution; every quote is made against a complete designation string.

The other half of the job is sourcing: comparing catalogs and suppliers, checking who publishes real numbers and who hides behind adjectives, consolidating carbide inserts, solid tooling and holders into one shipment out of Guangzhou. A trial box before a full re-stock is how a spec gets verified on your machine instead of in a brochure.

How I write

One rule, no exceptions: every number in every guide carries its source — an ANSI or ISO standard, an ASTM table, or a named supplier datasheet. Where a published range is a starting point rather than a guarantee, the text says so. Selection order beats lucky grades: decode the string, lock the group, pick the grade, match the breaker to the feed.

Off the clock

Basketball on weekends, and the quiet hobby of rebuilding websites — the same focus you get from chasing a CSS bug for three days, and the same reward: something that finally works cleanly. This site follows that taste: no jargon inflation, no hard sell, just the numbers and decisions that hold up at the machine.

Articles by Ray Chan

View all articles
MAINTENANCE

Sep 22 · 9 min read

Cutting Fluid Problems: Corrosion, Smell, and the Fixes

Flash rust, rotten-egg smell, and short sump life trace to pH, concentration, chloride, and tramp oil. The two-number fix for cutting fluid problems.

Ray ChanRead Article
MAINTENANCE

Sep 22 · 8 min read

How to Extend Carbide Tool Life: 9 Proven Practices

Nine shop-tested practices that extend carbide tool life: wear limits, chip load, coolant discipline, runout, entry rules and regrind math, with numbers.

Ray ChanRead Article
DRILLING

Sep 22 · 10 min read

Cobalt vs HSS vs Carbide Drill Bits: What Actually Lasts Longer

Cobalt, HSS and carbide drill bits compared on red hardness, speed windows, tool life and cost per hole, with the rigidity rule that decides the winner.

Ray ChanRead Article
MILLING

Sep 22 · 11 min read

Climb Milling vs Conventional Milling: Direction Matters

Climb vs conventional milling decided by physics: chip thickness, force direction, scale, backlash. The rules, and when each one wins.

Ray ChanRead Article
MILLING

Sep 22 · 10 min read

2 Flute vs 4 Flute End Mills: Which One for Your Job?

2 flute vs 4 flute end mill decided with real chip load math: slotting, aluminum, steel, stainless, finishing and deep pockets, plus a side-by-side table.

Ray ChanRead Article
MATERIAL GUIDES

Sep 22 · 9 min read

Why Does Aluminum Stick to End Mills? Built-Up Edge Explained

Built-up edge in aluminum explained: the weld-and-tear cycle, the stickiest alloys, and the geometry, flute, coating and parameter fixes that stop it.

Ray ChanRead Article
TROUBLESHOOTING

Sep 22 · 14 min read

Why Do Carbide End Mills Break? A Prevention Checklist

Why carbide end mills break: the three failure modes, chip thinning math, coolant and holder rules, and a startup checklist that stops the next fracture.

Ray ChanRead Article
TROUBLESHOOTING

Sep 22 · 10 min read

Why Do Carbide End Mills Chatter? 7 Causes and Fixes

Chatter fixes for carbide end mills: seven causes from overhang to speed regime, the wave-on-wave mechanism, and a cheapest-first diagnostic sequence.

Ray ChanRead Article
TURNING INSERTS

Sep 22 · 11 min read

Carbide Insert Selection Guide: ISO Grades & Chipbreakers Explained

Decode CNMG 120408 digit by digit, match ISO 513 groups to grades and chipbreakers, and run vendor-published speed and feed windows for steel and cast iron.

Ray ChanRead Article
THREADING

Sep 22 · 11 min read

Tap Drill Size Chart: How to Pick the Right Drill Bit (UNC/UNF/Metric)

How to pick tap drill sizes from published ANSI and ISO charts. The 75% thread rule, the metric formula, material adjustments and worked examples.

Ray ChanRead Article
MATERIAL GUIDES

Sep 22 · 14 min read

How to Choose End Mill Coatings: TiAlN vs AlTiN vs Uncoated

How to choose end mill coatings by wear mechanism. Published TiAlN and AlTiN temperature bands, when bare carbide wins, and what the datasheet must show.

Ray ChanRead Article
MATERIAL GUIDES

Sep 22 · 13 min read

How to Choose Carbide End Mills by Workpiece Material

End mill selection by workpiece material: ISO 513 grade groups, coatings, flutes, helix, edge prep and published starting speeds for steel, stainless, cast iron, aluminum, titanium and hardened steel, with source rows.

Ray ChanRead Article